Installation Sheet

2
PO BOX 558/3325 GRASSY HILL RD ROCKY MOUNT VIRGINIA 24151
www.uttermost.com
STYLE NO.
：
21264 PARTS LIST& Hardware List
：
*Please make sure you have all the parts indicated above before you begin assembling this item.
Please read wiring instructions before you begin assembling and installing your Ceiling Lamp
WARNING:BEFORE INSTALLING,Make sure electricity supply is
shut off to avoid a possible electric shock.
ASSEMBLY INSTRUCTIONS
1.Take the parts carefully out of the carton,Place them on a flat surface, and make
sure the parts will not be damaged.
2.Rotate the Ceramic Column onto the Pendant Body.Pull the core. Rotate the Finial
to the bottom of the Pendant Body,
3.Use Quick Link to connect the assembled Pendant,and use the other Quick Link to
connect the Canopy.
4.Attach the Cross Bar to the Outlet Box by using two Outlet Box Screws. (See
Figure1)
5.Install the Ground Wire in the Cross Bar with the supplied Green Ground Screw.
6.Place the null wire ,ribbed wire evenly against the ribbed wire from the Outlet Box
and place the live wire,smooth wire evenly against the smooth wire from the Outlet
Box,(Connecting the Wire---See Figure 2)
7.After the wires are connected,tuck them carefully inside the Outlet Box.Attach the
Canopy to the Nipple and secure with Chain Connector (See Figure 1)
8.Install 3*60W,Type B bulbs,(Not Included) into the socket of the fixture.
1 Canopy 1pc 6 Hex Nut 1pc
2 Cross Bar 1pc 7 Wire Connector 3pcs
3 Outlet Box Screw(1-1/8") 2pcs 8 Shade 1pcs
4 Green Ground Screw 1pcs 9 Finial 1pc
5 Nipple 1pc 10 Chain with 2pcs quick link 1set