Specifications

UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com Page 87
6.1.3.3 Lazy Mode
If you want the Wireless Router to operate in lazy mode, please select Lazy Mode from
the Opeartion Mode drop-down list, see Figure 6-9. In this mode, the Wireless Router
can connect to other wireless network devices in bridge mode or repearter mode; and at
the same time it can provide connectivity for wilreless clients.
Figure 6-9 Basic Wireless Settings - Lazy Mode
Operation Mode: Here please select Laze Mode.
The other paramters are the same as those of Repeater Mode. Please refer to
Section 6.1.3.1 Repeater Mode for detailed information.
6.1.4 Configuration Example for WDS
1. Requirements
In this example (see Figure 6-10), there are two Wireless Routers: Router A and Router B.
The Wireless Router A operates in Bridge Mode, its SSID is UTT123, security mode is
TKIP, pre-shared key is 123456789 and LAN IP address is 192.168.1.1/25. The Wireless
Router B’s IP address is 192.168.1.2/25. We want the two Routers to communicate with