Specifications

UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com Page 83
Figure 6-3 Basic Wireless Settings - Repeater Mode
Operation Mode: Here please select Repeater Mode.
Enable Wireless, SSID, Wireless Mode, Channel, Channel Width, and Enable
SSID Broadcast: Refer to Section 6.1.1 AP Mode for detailed information.
AP MAC Address: It specifies the MAC address of the remote AP.
Security Mode: It specifies the security mode to be used by the Wireless Router.
There are four options: None, WEP, TKIP and AES.
● None: It means that no security mode will be used.
● WEP: It means that the Wireless Router will use WEP for data encryption, see
Figure 6-4.
● TKIP: It means that the Wireless Router will use TKIP for data encryption, see
Figure 6-6.
● AES: It means that the Wireless Router will use AES for data encryption, see
Figure 6-7.