Specifications

UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com Page 81
Figure 6-2 Basic Wireless Settings - APClient Mode
Operation Mode: Here please select APClient Mode.
Enable Wireless, SSID, Wireless Mode, Channel, Channel Width, and Enable
SSID Broadcast: Refer to Section 6.1.1 AP Mode for detailed information.
AP SSID, AP MAC Address and Security Mode: Refer to Section 3.3.3.3 APClient
Internet Connection Settings for detailed information.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
Note
In APClient Mode, the Securtiy Mode, Channel and Channel Width configured on
the Wireless Router must match those on the remote AP. Otherwise, the Wirelesss
Router is unable to connect to the remote AP.