Specifications

UTT Technologies Chapter 5 Network
http://www.uttglobal.com Page 64
DNS proxy server on which a DNS proxy software is installed (e.g., Wingate), and the
local computers use this server as the primary DNS server. Now, the Wireless Router
will be used as a new gateway for the local computers. In this case, in order to use
DNS proxy service normally, the administrator only need to change the Wireless
Router’s LAN IP address to the old proxy DNS server’s IP address, and enable DNS
proxy on the Wireless Router, without having to change each computer.
5.4.2 Static DHCP
The Wireless Router offers static DHCP feature which allows you to manually bind an IP
address to a computer’s MAC address and thus that computer will always obtain the same
IP address from the DHCP server. More specifically, each time the specified computer
boots and requests its IP address from the Wireless Router’s DHCP server, the DHCP
server will recognize the computer’s MAC address and always assign the reserved IP
address to it.
5.4.2.1 Static DHCP Settings
Figure 5-18 Static DHCP Settings
User Name: It specifies a unique user name of the DHCP client that wants to be
assigned a static IP address.
IP Address: It specifies the IP address that you want to reserve for the DHCP client.
It must be a valid IP address within the range of IP addresses assigned by the DHCP
server.
MAC Address: It specifies the MAC address of the DHCP client.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
Back: Click to go back to the Network > DHCP Server > Static DHCP page.