Specifications

UTT Technologies Chapter 5 Network
http://www.uttglobal.com Page 47
5.1.2.1.1 Static IP Internet Connection Settings
Figure 5-6 Static IP Internet Connection
Interface: It specifies the name of the WAN interface. Here please select WAN1,
WAN2 or APClient.
Connection Type: It specifies the type of the Internet connection. Here please select
Static IP. You need to manually configure IP address, subnet mask, default gateway
and DNS server addresses, which are provided by your ISP.
ISP Policy: It specifies the route policy database used for the Interent connection.
There are four options: None, Telecom, Unicom and Mobile.
● None: It means that no route policy database is used. This option is selected by
default.
● Telecom: If your ISP is China Telecom, you may select this option. Then the
traffic destined for China Telecom servers will be forwarded through the
connection.
● Unicom: If your ISP is China Unicom, you may select this option. Then the traffic
destined for China Unicom servers will be forwarded through the connection.
● Mobile: If your ISP is China Mobile, you may select this option. Then the traffic
destined for China Mobile servers will be forwarded through the connection.
Update Policy: Click to update the corresponding route policy database.
IP Address, Subnet Mask, Default Gateway, Primary DNS Server and Secondary
DNS Server: Refer to Section 3.3.3.1.1 Static IP Internet Connection Settings for
detailed information.