Specifications

UTT Technologies Chapter 3 Quick Setup
http://www.uttglobal.com Page 34
Channel Width: It specifies the range of frequecies used by your wireless network.
The options are 20/40M and 20M. Note that this parameter can only act on 802.11n
wireless clients. 802.11b and 802.11g wireless clients can only use 20MHz channel.
● 20M/40M: If you select this option, 802.11n wireless clients will negotiate the
channel width with the Wireless Router.
● 20M: It you select this option, 802.11n wireless clients will use 20MHz channel.
Back: Click to go back to the previous page of the Setup Wizard.
Cancel: Click to revert to the last saved settings.
Exit: Click to exit the Setup Wizard and go to the Welcome page (see Figure 3-5).
The changes made in the Setup Wizard will be discarded.
Finish: Click to save the changes you have made in the Setup Wizard and close the
Setup Wizard.
Note
Do not forget to click the Finish button to save the changes you have made in the
Setup Wizard, else these changes will be discarded.