Specifications

UTT Technologies Chapter 3 Quick Setup
http://www.uttglobal.com Page 32
3.3.3.3.3 APClient Connection Settings - WPA-PSK/WAP2-PSK
Figure 3-13 Setup Wizard - APClient Connection Settings (WPA-PSK/WAP2-PSK)
AP SSID: It specifies the SSID of the remote AP. It must be between 1 and 32
characters long, and it is case sensitive.
AP MAC Address: It specifies the MAC address of the remote AP.
Security Mode: It specifies the security mode to be used by the Wireless Router.
Here please select WPA-PSK/WPA2-PSK to use WPA-PSK mode or WPA2-PSK
mode. In WPA-PSK or WPA2-PSK mode, the Wireless Router uses the pre-shared
key that is manulally entered to generate encryption keys.
WPA Mode: It specifies the WPA mode to be used by the Wireless Router. The
options are WPA-PSK and WPA2-PSK.
● WPA-PSK: It means that the Wireless Router will use WAP-PSK security mode.
● WPA2-PSK: It means that the Wireless Router will use WAP2-PSK security
mode.
Encrption Method: It specifies the encrytion method used for data encryption. The
options are TKIP and AES.
● TKIP: It means that the Wireless Router will use TKIP for data encryption.
● AES: It means that the Wireless Router will use AES for data encryption.
Pre-shared Key: This key serves as seed for generating encryption keys. It must be
identical to the remote AP’s. It must be between 8 and 63 characters long.
Back: Click to go back to the previous page of the Setup Wizard.
Cancel: Click to revert to the last saved settings.
Exit: Click to exit the Setup Wizard and go to the Welcome page (see Figure 3-5).
The changes made in the Setup Wizard will be discarded.