Specifications

UTT Technologies Chapter 3 Quick Setup
http://www.uttglobal.com Page 27
Figure 3-8 Setup Wizard - WAN1/WAN2 Settings (DHCP)
Connection Type: It specifies the type of the Internet connection. Here please select
DHCP. The Wireless Router will automatically obtain the WAN IP address, subnet
mask and gateway and DNS server addresses from your ISP’s DHCP server.
Back: Click to go back to the previous page of the Setup Wizard.
Cancel: Click to revert to the last saved settings.
Exit: Click to exit the Setup Wizard and go to the Welcome page (see Figure 3-5).
The changes made in the Setup Wizard will be discarded.
Skip: Click to go directly to the next page of the Setup Wizard. The changes made
on the current page will be discarded.
Next: Click to go to the next page of the Setup Wizard.
3.3.3.1.3 PPPoE Internet Connection Settings
Please select PPPoE from the Connection Type drop-down list if your ISP uses PPPoE
to establish the Internet connection for you. Then the following page will be shown.
Figure 3-9 Setup Wizard - WAN1/WAN2 Settings (PPPoE)
Connection Type: It specifies the type of the Internet connection. Here please select
PPPoE. The Wireless Router will automatically obtain the WAN IP address, subnet
mask and gateway IP address from your ISP’s PPPoE server.
User Name and Password: They specify the PPPoE login user name and password
provided by your ISP. Please ask your ISP if you have any questions.
Back: Click to go back to the previous page of the Setup Wizard.