Specifications

UTT Technologies Appendix B FAQ
http://www.uttglobal.com Page 272
4. How to connect a Windows XP PC to the Device
wirelessly?
Step 1: Configuring TCP/IP Settings
1. Right-click Network Neighborhood and select Properties.
2. Right-click Wireless Network Connection and select Properties.
3. Double-click Internet Protocol (TCP/IP) to open the Internet Protocol
(TCP/IP) Properties window.
4. Do one of the following:
1) If a DHCP server is available on your network, and you want IP
settings to be assigned automatically, select Obtain an IP address
automatically and Obtain DNS server address automatically.
2) If you want to set the IP address and other settings manually, do the
following:
 Select Use the following IP address, enter the static IP address
(a free IP address in 192.168.1.0/24) in IP address box,
255.255.255.0 in Subnet mask box, and enter the IP address of
your default gateway in Default Gateway box.
 Select Use the following DNS server addresses, and enter the
IP addresses of DNS servers in Preferred DNS Server and
Alternate DNS Server (optional) boxes. If the primary DNS
server is unreachable, the secondary DNS server is used.
5. Click OK to finish the configuration.
Step 2: Connecting the PC to Your Wireless Network
1. Make sure your wireless network adapter is enabled.
2. Right-click the wireless network icon in the lower right corner of your
screen, and click View Available Wireless Networks.
3. In the list of wireless networks that appears, click the network you want to
connect to, and then click Connect.
4. If prompted, enter the network security key, and then click Connect.
5. If the connection is successful, the word Connected appears to the right of
your network name.