Specifications

UTT Technologies Appendix A How to configure your PC
http://www.uttglobal.com Page 266
Figure A-0-1 Local Area Connection Properties
3. In the Internet Protocol (TCP/IP) Properties dialog box (see Figure A-0-2), select
the Use the following IP address option，enter 192.168.1.x (x is between 2 and 254,
including 2 and 253) in the IP address text box, 255.255.255.0 in the Subnet mask
text box, and 192.168.1.1 in the Default gateway text box.
Figure A-0-2 Internet Protocol (TCP/IP) Properties
4. Select the Use the following DNS server address option, enter the primary DNS
server IP address in the Preferred DNS server text box, and enter the secondary
DNS server IP address in the Alternate DNS server text box (optional). A DNS query
is sent to the primary DNS server at first. If the primary DNS server is unable to
service the query, the query will be sent to the secondary DNS server.
5. Click the OK button. Now you have finished configuring the TCP/IP settings.
●
Method Two: Automatically Configuring TCP/IP with DHCP
1. To ensure that the PC can obtain an IP address and other TCP/IP parameters
automatically from the Wireless Router, you should go to the Network > DHCP
Server page to enable DHCP server on the Wireless Router.