Specifications

UTT Technologies Chapter 13 System
http://www.uttglobal.com Page 255
Step 3 Renewing the firmware
Click the Upgrade button to renew the Router’s firmware. If you click the Upgrade button,
you will be prompted to confirm the upgrade (see Figure 13-8). Then you can click OK to
upgrade the firmware and restart the Router, or click Cancel to cancel the operation.
Figure 13-8 Prompt Dialog Box - Firmware Upgrade
Note
1. It is strongly recommended that you upgrade the firmware when the Router is under
light load.
2. If you upgrade firmware timely, the Router will have more functionality and better
performance. The right upgrade will not change the Router’s current settings.
3. To avoid any unexpected error or unrecoverable hardware damage, do not power off
the Router during upgrading.
4. After the upgrade is complete, the Router will automatically restart in order for the
new firmware to take effect, without human intervention.
13.5 Remote Management
This section describes the Administration > Remote Management page. In this page,
you can enable HTTP remote management, which allows you to access the Router’s Web
UI from anywhere over the Internet.