Specifications

UTT Technologies Chapter 13 System
http://www.uttglobal.com Page 253
13.3.3 Reset to Factory Defaults
Figure 13-6 Reset to Factory Defaults
Reset: To reset the Router to factory default settings, click the Reset button, and
then restart the Router.
Note
1. After performing the reset operation, you must manually restart the Router in order for
the default settings to take effect.
2. The reset operation will clear all of the Router’s custom settings. It is strongly
recommended that you backup the current configuration before resetting.
3. The default administrator user name and password both are admin (case sensitive).
The default LAN IP address is 192.168.1.1 with a subnet mask of 255.255.255.0.