Specifications

UTT Technologies Chapter 12 VPN
http://www.uttglobal.com Page 205
remote VPN appliance.
Encryption: It has two options. They are None and MPPE.
 None: It doesn’t encrypt the PPTP tunnels.
 MPPE: Microsoft Point-to-Point Encryption. It adopts MPPE to encrypt the PPTP
tunnels.
Remote Subnet IP: It specifies the subnet IP address of the remote network. In most
cases, you may enter the IP address of the remote VPN appliance’s LAN interface.
Remote Subnet Mask: It specifies the subnet mask of the remote network.
Server IP/Domain Name: It specifies the IP address or domain name of the remote
PPTP server. In most cases, you may enter the WAN IP address or domain name of
the remote VPN appliance.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
Back: Click to go back to the PPTP List.
12.1.3 PPTP Server Settings
This section describes the VPN > PPTP > PPTP Server>Global Setting page.
The Global Setting under PPTP Server specifies the range of IP addresses
reserved for remote PPTPs. When the UTT VPN gateway acts as a PPTP server, it will
assign an IP address from this range to a PPTP, and then it will use the assigned IP
address to communicate with the client.