Specifications

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 173
10.2 Flexible Bandwidth Management
This section describes QoS > Flexible Bandwidth page.
Note
We recommend that you do not use both Fixed Rate Limiting and Flexible
Bandwidth Management at the same time.
Figure 10-3 Flexible Bandwidth Management Settings
Enable Flexible Bandwidth: Select the check box to enable flexible bandwidth
management feature.
Uplink Bandwidth and Downlink Bandwidth: Set the uplink and downlink
bandwidth of each Internet connection, which are provided by your ISP. Note that the
number of WAN interfaces depends on the device model.
10.3 P2P Rate Limit
This section describes the QoS > P2P Rate Limit page.
P2P rate limit feature is specially designed for P2P application. The P2P rate limit has the
highest priority, that is, even if you have created rate limit rules for some LAN users in the
QoS > Rate Limit Rule page, the P2P traffic of these users is still restricted by P2P rate
limit settings. Using P2P rate limit, you can effectively reduce network congestion caused
by the usage of P2P applications without the expense of the other LAN users’ traffic and