Specifications

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 172
10.1.2 Fixed Rate Limiting Rule Settings
To add a new fixed rate limiting rule, go to QoS > Fixed Rate Limiting page (see Figure
10-1), next click Add go to QoS > Fixed Rate Limiting Settings page (see Figure 10-2),
and then configure it, lastly click Save.
Figure 10-2 Fixed Rate Limiting Rule Settings
Group Name: Enter a unique name for the group to which the fixed rate limiting rule
applies.
Network Object: Select the members of the group. You can select the IP Range button to
specify a range of IP addresses, or select the User Group button to select a user group.
The members in the group are subject to the fixed rate limiting rule.
Rate Limiting Mode: The options are Each and Share.
 Each: The specified Max. Tx/Rx Rate is assigned to each member in the group.
 Share: The specified Max. Tx/Rx Rate is shared by all members in the group.
Max. Tx Rate: Specify the maximum upload speed for the members in the group. The
value 0 means unlimited rate.
Max. Rx Rate: Specify the maximum download speed for the members in the group. The
value 0 means unlimited rate.
Schedule Settings: Select the days and times when the fixed rate limiting rule is in effect.
By default, the rule is always in effect.