Specifications

UTT Technologies Chapter 9 Application Control
http://www.uttglobal.com Page 161
to use IM applications, and block all other applications during working hours.
 Policy 2: It is used to block the Technology and Financial Departments’ employees
from accessing all the Internet applications during working hours.
3. Configuration Procedure
1） Adding Policy 1
Step 1 Go to Application Control > Application Control page, and click Add to go to
Internet Application Management Settings page.
Step 2 Make the following settings.
 Enter CSD_SD in the Group Name text box.
 Select the IP Range radio button, and enter 192.168.1.101 and 192.168.1.170 in the
two text boxes.
 Select the first Select All check box in the page, and then clear the Select All check
box next to IM Software.
 In the Schedule Settings section, clear the Every Day check box, and select the
Mon, Tue, Wed, Thu and Fri check boxes. Next, choose 09:00 and 18:00 as the
daily start time and end time.
Step 3 Click Save to add this policy to Application Management List.
2） Adding Policy 2
Step 1 Go to User Management > User Group to add a user group for the Customer
Service and Sales Departments’ employees: Group Name is TD_SD_Group, Group
Type is User Group, and it contains two IP address ranges: from 192.168.1.11 to
192.168.1.100, and from 192.168.1.171 to 192.168.1.180.
Step 2 Go to Application Control > Application Control page, and click Add to go to
Internet Application Management Settings page.
Step 4 Make the following settings.
 Enter TD_SD in the Group Name text box.
 Select the User Group radio button, and select TD_SD_Group from the drop-down
list.
 Select the first Select All check box in the page.
 In the Schedule Settings section, do the same as the policy 1.
Step 5 Click Save to add this policy to Application Management List.
3） Enabling Internet Application Management