Specifications

UTT Technologies Chapter 8 User Management
http://www.uttglobal.com Page 154
8.5.4 How to Add the User Groups
If you want to add one or more User Groups, do the following:
Step 1 Go to the User Management > User Group page, and then click the Add
button to go to the setup page.
Step 2 Specify the Group Name of the User Group.
Step 3 Select the group type from the Group Type drop-down list.
Step 4 Add IP addresses to the group. There are two methods to add them.
1) Method One: Select the New Address radio button, enter the start and end
IP addresses in the Start Address and End Address text boxes, and then
click ==> to move the new address range to the Address Members list
box. You can continue to add another address ranges if needed.
2) Method Two: Select the Existing Group radio button, select one or more
configured User Groups, and then click ==> to move the selected User
Groups to the Address Members list box.
Step 5 Click the Save button to save the settings. You can view the User Group in the
User Group List.
Step 6 If you want to add another new User Group, please repeat the above steps.
8.5.5 How to Edit an User Group
If you want to modify a configured User Group, do the following:
Step 1 Go to the User Management > User Group page.
Step 2 Click the Edit hyperlink of the User Group in the User Group List to go to the
setup page.
Step 3 Modify the address members as required. There are two cases:
1) If you want to modify an address range, select the address range in the
Address Members list, click <== to move it from the Address Members
list box to the left editable list, and then modify the Start Address and/or
End Address, lastly click ==> to move the modified address range to the
Address Members list box again.
2) If you want to delete an address member, select the member in the
Address Members list box, and then click the Delete button.