Specifications

UTT Technologies Chapter 8 User Management
http://www.uttglobal.com Page 144
8.3.5 PPPoE User Status
You can go to the User Management > PPPoE Server > PPPoE User Status page view
the status information of online PPPoE dial-in users in the PPPoE User Status List,
which include the user name, assigned IP address, MAC address, Rx rate and Tx rate,
and online time.
Figure 8-16 PPPoE User Status List
User Name: It displays the user name of the PPPoE account. The PPPoE dial-in user
uses it to dial-up and establish the PPPoE session to the Router.
IP Address: It displays the PPPoE dial-in user’s IP address assigned by the PPPoE
server.
MAC Address: It displays the PPPoE dial-in user’s MAC address.
Online Time: It displays the elapsed time since the PPPoE session was established.
Tx Rate: It displays the real-time upload rate (in kilobytes per second) of the PPPoE
dial-in user.
Rx Rate: It displays the real-time download rate (in kilobytes per second) of the
PPPoE dial-in user.
User Status: It displays the PPPoE account status. If a PPPoE dial-in user has
established the PPPoE session to the Device successfully with the PPPoE account, it
displays Open; Else, it displays Closed.
Session ID: It displays the session ID of the PPPoE Session, which uniquely
identifies a PPPoE session.
Disconnect: If you want to hang the established PPPoE session up manually, select
the leftmost check box of this PPPoE session, and then click the Disconnect button.