Specifications

UTT Technologies Chapter 8 User Management
http://www.uttglobal.com Page 140
8.3.2 PPPoE Server Global Settings
Figure 8-13 PPPoE Server Global Settings
Enable PPPoE Server: It allows you to enable or disable PPPoE server. If you want
to enable PPPoE server on the Router, please select this check box.
Mandatory PPPoE Authentication: It allows you to enable or disable Mandatory
PPPoE Authentication, that is, only the PPPoE dial-in users can access the Internet
through the Device. If you want to only allow the PPPoE dial-in users to access the
Internet through the Device, please select this option. The one exception is that you
select an address group from Exception Group drop-down list.
Execption Group: It specifies an address group that is exempt from the restriction of
Mandatory PPPoE Authentication. If you select an address group here, the LAN
users that belong to this address group are exempt from the restriction of Mandatory
PPPoE Authentication, that is, whether it is enabled or not, those users may access
the Internet through the Device even they aren’t PPPoE dial-in users. The address
group is configured in the User Management > User Group page.
Start IP Address: It specifies the starting IP address that is assigned by the PPPoE
server.
Primary DNS Server: It specifies the IP address of the primary DNS server that is
available to a PPPoE client.
Secondary DNS Server: It specifies the IP address of the secondary DNS server
that is available to a PPPoE client.
Allow Users to Change Password: Select the check box to allow users to change