Specifications

UTT Technologies Chapter 7 Advanced
http://www.uttglobal.com Page 126
SNMP manager automatically. The Device supports SNMP v1/v2c and Management
Information Base II (MIBII) groups.
The SNMP manager can read and change the information about the Device .
Figure 7-19 SNMP Settings
Enable SNMP: It allows you to enable or disable the SNMP agent. If you want to
enable the SNMP agent on the Device, please select this check box.
SNMP Trap Host: The IP address of host that receives SNMP Trap information.
SNMP Read Community Name: The SNMP read community name is used as a
shared secret for SNMP managers to access the SNMP agent and to read the
configuration on the device but can’t change the configuration on the device.
SNMP Write Community Name: The SNMP write community name is used as a
shared secret for SNMP managers to access the SNMP agent and to read and
change the configuration on the device.
SNMP Trap community Name: The device will send SNMP trap information to
SNMP manager in the name of SNMP Trap community Name, so network
administrator can figure out where the device locates.
Save: Click it to save the SNMP settings.
Note
If you want to use SNMP Manager to manage the Device via Internet, please select
the SNMP check box in the System > Remote Management page first.