Specifications

UTT Technologies About This Manual
http://www.uttglobal.com Page 5
0.3.4.2 Sorting Function
All the lists in the Web UI support sorting function. The operation is as follows: You can
click any column header to sort the entries in a list by that column. Click once to sort the
entries in descending order, click again to sort them in ascending order. Click a third time
to sort them in descending order, and so forth. After sorted, the list will be displayed from
the first page.
0.4 Factory Default Settings
The following table lists the default values of several important parameters.
Parameter
Default Value
Description
Administrator User Name
admin
You can use the administrator account to login
to the Wireless Router’s Web UI.
Note: Both the User Name and Password are
case sensitive.
Administrator Password
admin
LAN IP Address
192.168.1.1
They are the IP address and subnet mask of
the Wireless Router’s LAN interface. You can
use this IP address to access and manage the
Wireless Router.
LAN Subnet Mask
255.255.255.0
SSID
UTT-HIPER_XXXXXX
To connect to the Wireless Router, wireless
clients must use the same SSID as the
Wireless Router. Therein, “XXXXXX” is the
Wireless Router’s serial number in
hexadecimal format.
Table 0-3 Factory Default Settings
0.5 Document Organization
This guide mainly describes the settings and applications of the HiPER 518W Wireless
Router, which include product overview, hardware installation, quick setup, start menu,
network, wireless, advanced, user management, firewall, VPN, System, status and
support.