Specifications

UTT Technologies Chapter 7 Advanced
http://www.uttglobal.com Page 115
Figure 7-8 One2One NAT Rule Settings - Example
Step 3 Select One2One from the NAT Type drop-down list.
Step 4 Enter 202.1.1.131 in the Start External IP text box; enter 192.168.1.200 and
192.168.1.203 in the Start Internal IP and End Internal IP text boxes
respectively.
Step 5 Select WAN1 from the Bind to drop-down list.
Step 6 Click the Save button to save the settings. Till now you have finished
configuring the NAT rule, and you can view it in the NAT Rule List.
7.1.4 DMZ
Figure 7-9 DMZ Host Settings
Enable DMZ: It allows you to enable or disable DMZ feature. If you want to enable
DMZ feature on the Router, please select this check box.
DMZ Host IP Address: It specifies the private IP address of the DMZ host.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.