User guide

5. How to Configuration of UT Star 300R2U For Prepaid BB
1. Type http://192.168.1.1/main.html in address bar of Internet Explorer.
2. In User Name type admin and password admin, click OK.
3. The Modem page will display.
4. Click on Advanced Setup and select WAN Button then Click Add Tab
5. In VPI:- 0 and VCI:- 37 and Service Category:- UBR Without PCR
and click on Next.
6. In Connection Type - Select Bridging and click on Next.
7. Check on Enable WAN Service Dialog Box. Click Next.
8. Click on Save Button.
9. Click on Save/Reboot Button.
10. Wait for Two Minutes.
11. Again Device Info page will displayed.
12. Select Device Info and Click on LAN Tab and select Disable DHCP
then Click on Save/Reboot
13. After rebooting go Device Info and Status UP
Remarks:
a. Keep IP address obtains automatically in TCP/IP Properties
b. Check for IP Address in computer right click on LAN connection click on
status and go to support. IP range will be 59.180.232.0 to 59.180.239.0
c. Now open the site given below:
http://wifine.mtnl.net.in/subscriberv3/login.aspx
1. If you want to register then click on register button. Enter your 13 digits Pin
No. and fill all required field in form.
2. If already registered, click on login, put User Name , Password, for prepaid
broadband and enjoy surfing.
Troubleshooting
1. Check Proper Connectivity at Splitter/CPE
2. Check LAN is Enable or Disable.
3. Check line shouldn’t be Parallel.
4. DNS ::
a. Preferred DNS: 59.179.243.70
b. Alternate DNS : 203.94.243.70
12