User's Manual

H TO SET SOUND SETTINGS
To set ringer volume
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Ringer Volume.
2.
Select Silent, Vibrate On, Level 1 ~ Level 5
, then
, then press the
OK Key SET.
Note:
To play/stop sound, press the Left Option Key [ ] Play/Stop.
To set call sounds
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Call Sounds.
2.
Select Call Ringtone or Call Vibrate
, then
, then press the OK
Key OK.
• Call Ringtone: Select the desired Call Ringtone
, then
, then
press the OK Key OK.
Note:
To play/stop sound, press the Left Option Key [ ] Play/Stop.
• Call Vibrate: Select On or Off
, then
, then press the OK Key
OK.
To set msg sounds
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Msg Sounds.
2.
Select TXT Message, PIX Message or Voicemail MSG
, then
, then
press the OK Key OK.
• Tone: To Set as ringtone.
Note:
To play/stop sound, press the Left Option Key [ ] Play/Stop.
• Vibrate: Select On or Off
, then
, then press the OK Key OK.
• Reminder: Select Once, Every 2 Minutes, Every 15
Minutes or Off
, then
, then press the OK Key OK.
To set service alerts
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Service Alerts.
2.
Choose Roam, Minute Beep or Call Connect
, then
, then press
the OK Key OK.
3.
Select On or Off
, then
, then press the OK Key OK.
To set the power tone on/off
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Power On/Off.
2.
Choose Power On Tone or Power Off Tone
, then
, then press the
OK Key OK.
3.
Select On or Off
, then
, then press the OK Key OK.
To set the key tone
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Sound Settings > Key Tone.
2.
Select Silent, Level 1 ~ Level 5
, then
, then press the OK Key OK.
H CHANGE THE DISPLAY
To set my banner
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Display Settings > My Banner.
2.
Enter text
, then
, then press the OK Key OK.
To set the backlight duration
1. In standby mode, press the Left Option Key [ ] Menu >
Settings > Display Settings > Backlight Duration.
2.
Select Display or Keypad
, then
, then press the OK Key OK.
• Display: Select 7 Seconds, 15 Seconds, 30 Seconds,
Always On or Always Off
, then
, then press the OK
Key OK.
• Keypad: Select 7 Seconds, 15 Seconds, 30 Seconds,
Always On or Always Off
, then
, then press the OK
Key OK.
Settings 5958 Settings