Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.1 UTStarcom iAN-02EX TELEPHONE’S ANALOGUE ADAPTER INSTALLATION GUIDE Release V1.8.2.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.2 SUMMARY SKYPHO VOIP SERVICE....................................................................................................3 iAN-02EX UTStarcom PACKAGE CONTENT .....................................................................3 EQUIPMENT PHYSICAL CONNECTION............................................................................4 ACCESS TO THE ADAPTER .........................................................
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.3 SKYPHO VOIP SERVICE The use of the SKYPHO’s voice service on IP (VoIP) is simple and quick. You need only an Internet access, a traditional telephone (analogue) and a PC, and with few “clicks” you could use the new telephone line with quality equal to the traditional landline.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.5 ACCESS TO THE ADAPTER When you finished the connections, you can proceed with the iAN-02EX ATA configuration. Before proceeding with the ATA configuration it is necessary to verify if in your router the DHCP service is working, (this means that in your LAN are used IP addresses in a dynamic way), or if the DHCP service is not working, (this means that in your LAN are used IP addresses in a static way).
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.6 Access to ATA when the DHCP is not working 1. configure the static IP address on the LAN port of your PC. Click on “Start \ Settings\ Network connections“, double click on “Local area connections (LAN)” . In the new window click on “Properties” and then double click on “Internet Protocol (TCP/IP)”.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.7 ATA CONFIGURATION Before proceeding with the configuration of your iAN-02EX ATA via WEB Browser, it is important that you have at your disposal the Eutelia’s username and password for the VoIP service that you obtained during registration or those you have modified on the Eutelia’s site.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.8 LAN parameters Click on “LAN configuration” menu, then verify that the “Status” item of the DHCP Configuration is set on Disable. Note: If in your LAN are used static IP addresses, it is necessary to modify the “LAN IP Configuration” and insert the values “LAN IP, LAN Mask e LAN Gateway” to avoid conflicts on the network.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.9 VoIP parameters 1.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.10 2. click on “SIP” menu, then on “Send#” item choose the option Disable and click OK 3. click on “STUN” menu, then verify the values and click OK The “NAT Address” item will be automatically updated with the public IP address after the authentication of the ADSL access.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.11 Save configuration 1. click on “Save Configuration” menu, then select “Configuration File” and click on “Save” 2. after few seconds, will appear the “Reboot” page: click on “Reboot” and wait the restart of ATA.
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.
