Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
98
A
PPENDIX
B:
I
AN-02EX P
ROVISIONING
M
ETHODOLOGY
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Typical provisioning/upgrade scenario is as shown in Figure 74.
Figure 74
Provisioning / Upgrade Scenario
In this mechanism, the device configuration/firmware can be defined on a
centralized server called the Provisioning/Upgrade server (Refer section 3).
This configuration/firmware can be downloaded to the device manually or can
be fetched from the device periodically. The device configuration can be defined
in a flat file format (Refer section 3.8.4.), which can be either encrypted or
non-encrypted ((Refer section 3.8)