Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
90
Chapter 5: Configuration
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Figure 69
View - Configuration - abconfig.cfg.txt
Save
The Save configuration contains the following sections:
■
Save Configuration
■
Load Default Settings
■
Load Default Settings using FXS Ports
■
Load Default Keypad
Save Configuration
Whenever there's new configuration or modification, the user
MUST
save the
new configuration data and then restart the device for the new settings to take
effect.
Click
Save Configuration
in the
Save
section. Figure 70 prompts for
confirmation. Click
Save
to to write the new configuration data into the FLASH
Memory immediately.
Figure 70
Save - Save Configuration
Reboot
the module for the new configuration to take effect.