Technical data

78 Chapter 5: Configuration
iAN-02EX Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Click Speed Dial in the VoIP section. Figure 53 prompts for configuration. Refer
to Table 40
for more information of the parameters.
Figure 53 VoIP - Speed Dial
Configure the parameters accordingly and click
Add / Modify to create / modify
an entry.
Note: The modify function only allows destination modification of an existing
speed dial. To modify the number for an existing speed dial, delete the current
speed dial and create a new one.
Enter the corresponding speeddial number listed in the table and click Delete to
remove the entry. Click
Refresh to obtain the latest configuration information.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Call Features Click Call Features in the VoIP section. Figure 54 prompts for configuration.
Refer to Table 41
for more information of the parameters.
Table 40 VoIP - Speed Dial Field Description
Item Description
VoIP Speed Dial
Number The speed dial number of the call party.
Destination The SIP address or PSTN number of the called party
Speed Dial Table
No. The ID number for a speed dial entry
Number The assigned speed dial number for a called party.
Destination The full address of the called party.