Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
VoIP
77
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Figure 52
VoIP - Stun
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Speed Dial
The speed dial is used to set up a list of telephone numbers and SIP addresses
for the frequently called callee. In this list, a shorter number is assigned to the
called party instead of original phone numbers or addresses. The module
supports up to 10 speed dial numbers.
Table 39
VoIP - STUN Field Description
Item Description
NAT Address The IP address of NAT firewall.
Default: 0
Stun Server Address The IP address of STUN (Simple Traversal of User Datagram)
server.
Default: 0
Stun Server Port The port number of STUN server.
Default: 3478
Local Port The local port number of STUN client.
Default: 3478
Expires The period that the VoIP Gateway sends STUN message to STUN
server. This is to check the connection status in case the VoIP
gateway is accidentally disconnected from STUN server.
Default: 60 seconds