Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
VoIP
73
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Save the configuration and Reboot the module for the new configuration to take
effect.
RTP
Click
RTP
in the
VoIP
section. Figure 49 prompts for configuration. Refer to
Table 36
for more information of the parameters.
Figure 49
VoIP - RTP
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Tone
iAN-02EX supports configuration of pre-configured audible tones based on the
geographical location.
Click
Tone
in the
VoIP
section. Figure 50 prompts for configuration. Refer to
Table 37
for more information of the parameters.
Table 36
VoIP - RTP Field Description
Item Description
RTP Port RTP port number
Default: 13456