Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
VoIP
69
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Save the configuration and Reboot the module for the new configuration to take
effect.
Note: Refer to Protocol for disable/enable MGCP mode.
User
Click
User
in the
VoIP
section. Figure 46 prompts for configuration. Refer to
Table 33
for more information of the parameters.
Figure 46
VoIP - User
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Note: Certain SIP proxies use login ID for authentication purpose. Configure the
login ID as specified by SIP proxy. If login ID is not required, keep the login ID as
0.
SIP
Click
SIP
in the
VoIP
section. Figure 47 prompts for configuration. Refer to
Table 34
for more information of the parameters.
Table 33
VoIP - User Field Description
Protocol Description
User Check Box To select/deselect the user
Username The name (or phone number) of the user
Password The password for this user
Display name The user name to be displayed
Login ID The ID for this user