Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
Element Management System (EMS)
63
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Figure 40
Syslog - Syslog
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Element Management
System (EMS)
The EMS configuration contains the following sections:
■
EMS
■
SNMP Community
■
SNMP Trap Target
////////////////////////////////
EMS
Click
EMS
in the
EMS
section. Figure 41 prompts for configuration. Refer to
Table 28
for more information of the parameters.
Table 27
Syslog - Syslog Field Description
Item Description
Server Address The IP address of syslog server.
Default: 0, disable syslog server
Server Port The port number of syslog server.
Default: 514
Level-3/Level-4 Debug Disable / enable sending level-3/level-4 debug messages to
syslog server
Default: Disable