Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure

Provision
61
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
and the existing local setting. If the downloaded setting parameter is newer, then
it will overwrite the existing local setting parameters.
Provision
Click
Provision
in the
Provision
section. Figure 39 prompts for configuration.
Refer to Table 26
for more information of the parameters.
Figure 39
Provision - Provision
Table 26
Provision - Provision Field Description
Item Description
Provision Priority The priority of the provision server.
Default: TFTP First
TFTP Server Address The IP address or URL of the TFTP provision server.
Default: devicecfg.private.net/devicecfg/utstarcom/config
TFTP Server Port The port numbers of the TFTP provision server. When enabled,
port 1 is required and port 2 & 3 are optional. When specified, port
2 is used if port 1 is not available. Port 3 is used if port 1 and port 2
are not available.
Default: 69, 100, 200