Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
PSTN
59
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Figure 37
PSTN - Switch Key
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Digit Map
This function allows the users to set PSTN digit map. Normally the telephone is
using VoIP service unless the VoIP service is not available. However, the user
can set up a list of numbers with specific prefix and total length to switch from
VoIP mode to PSTN mode. The module supports up to 10 PSTN digit maps.
Click
Digit Map
in the
PSTN
section. Figure 38 prompts for configuration. Refer
to Table 25
for more information of the parameters.
Table 24
PSTN - Switch Key Field Description
Field Description
Pstnswkey The PSTN switch key for swathing from VoIP mode to PSTN
mode.
Default: 0000