Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
Gateway Mode Settings
49
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Figure 28
NTP - NTP
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
Note: The Time Zone does not adjust automatically to the North America
daylight saving time. Adjust the value manually when needed. -4 is the time
zone with daylight saving and -5 is without daylight saving. The value can also
be modified through the configuration file.
Gateway Mode
Settings
The Gateway Mode Settings provision contains the following sections:
■
LAN Configuration
■
Port Forwarding
■
IP Filter
■
DMZ
Note: The functions described in this section apply only to Gateway mode. Refer
to Device Mode
for device mode configuration.
Table 15
NTP - NTP Field Description
Item Description
NTP Server The IP address of the network time protocol server.
Expires The period that the VoIP gateway retrieves time from NTP server.
Default: 86400 seconds
Time Zone The time difference between the local time and GMT.
Default: -5