Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
DOS
47
Part Number UTSI-NJTC-200323150117
iAN-02EX
June 2005
Administrator Manual
Figure 26
WAN - MTU Rate
Configure the parameters accordingly. Click
OK
to confirm the modification or
click
Cancel
to discard the modification.
Save
the configuration and Reboot the module for the new configuration to take
effect.
DOS
DOS (Denial of service) provides access control for RTP packets, web/telnet
provisioning, etc.
Denial of Service
Click
Denial of Service
in the
DOS
section. Figure 27 prompts for configuration.
Refer to Table 14
for more information of the parameters.
Figure 27
DOS - Denial of Service
Table 13
WAN - MTU Rate Field Description
Field Description
MTU Rate Specify the network MTU rate
Default: 1460