Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
38
Chapter 5: Configuration
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Note: Unless otherwise noted, this chapter uses Gateway Mode with Supervisor
level in all examples. Please note that some sections may not apply to Bridge
Mode or User level login.
Configuring via Web
Browser
Once the TCP/IP of the PC is properly configured, please proceed the following
steps:
1
Start a web browser window.
2
For Gateway mode, enter the default IP address of 172.25.25.1 to access the
web configuration menu. For Bridge Mode, enter the default IP address of
172.25.25.1.
VoIP Protocol V
MGCP
V
User
V
SIP
V
Audio Config
V
RTP
V
Tone
V
FAX
V
STUN
V
Speed Dial
VV
Call Features
V
Digit Map
V
Hook Flash
V
Jitter Buffer
V
Password
Supervisor Password V
User Password
VV
Upgrade
Firmware V
Configuration
V
View
Configuration V
Save
Save Configuration VV
Load Default Settings
V
Load Default Settings
using FXS Ports
V
Load Default Keypad
V
Reboot
Reboot VV
Table 5
Feature Lists
Features Functions User Level Supervisor Level