Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
34
Chapter 4: Configuring TCP/IP Protocol
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Figure 13
Starting Web Browser Window - Gateway Mode
3
Figure 14 prompts for user name and password. The web configuration menu
provides two operation modes: user mode and supervisor mode. For user
mode, enter the predefined user name as
user
and password as
12345
. For the
supervisor mode, enter the predefined user name as
supervisor
and password
as
utstar
. Click OK to access the configuration as shown in Figure 15.
Figure 14
User Name / Password Window - Gateway Mode