Technical data

Default Value and Value Range 123
Part Number UTSI-NJTC-200323150117 iAN-02EX
June 2005
Administrator Manual
voip_callfeature_forno_num2 0 A generic string with up to 50 characters.
voip_callfeature_forno_en2 0 0: Disable for port 2
1: Enable for port 2
voip_callfeature_for_ringnum2 0 0 to 10
voip_callfeature_alertinfo_num2 0 A generic string with up to 32 characters.
voip_call_second_feccode2 *25 A "*" character followed by 2 digits number.
voip_callfeature_wotransfer_feccode2 *24 A "*" character followed by 2 digits number.
voip_callfeature_wtransfer_trancode2 #44 A "#" character followed by 2 digits number.
voip_callfeature_waiting_act2 *99 A "*" character followed by 2 digits number.
voip_callfeature_waiting_deact2 #99 A "#" character followed by 2 digits number.
voip_callfeature_foraways_act2 *75 A "*" character followed by 2 digits number.
voip_callfeature_foraways_deact2 #75 A "#" character followed by 2 digits number.
voip_callfeature_forbusy_act2 *76 A "*" character followed by 2 digits number.
voip_callfeature_forbusy_deact2 #76 A "#" character followed by 2 digits number.
voip_callfeature_forno_act2 *77 A "*" character followed by 2 digits number.
voip_callfeature_forno_deact2 #77 A "#" character followed by 2 digits number.
voip_callfeature_dnd_en2 0 0: Disable for port 2
1: Enable for port 2
voip_callfeature_blockclid_en2 0 0: Disable for port 2
1: Enable for port 2
voip_callfeature_blockclid_percall_act2 *67 A "*" character followed by 2 digits number.
voip_callfeature_rej_priv_en2 0 0: Disable for port 2
1: Enable for port 2
voip_callfeature_conference_en2 1 0: Disable for port 2
1: Enable for port 2
voip_callfeature_conference_code2 #92 A "#" character followed by 2 digits number.
voip_callfeature_busyredial_en2 1 0: Disable for port 2
1: Enable for port 2
voip_callfeature_busyredial_code2 #5 A "#" character followed by 2 digits number.
voip_callfeature_busyredial_repeat2 10 Time in seconds. Must be less then the value in
voip_callfeature_busyredial_stop2.
voip_callfeature_busyredial_stop2 60 Time in seconds. Must be greater then the value in
voip_callfeature_busyredial_repeat2
voip_callfeature_polarity_reversal_en2 0 0: Disable for port 2
1: Enable for port 2
voip_sip_with_sdp 1 0= without SDP
1=with SDP
voip_sip_localport 5060 Valid port number
voip_sip_proxy_address 0 Valid IP address
0: Disable
voip_sip_proxy_port 5060 Valid port number
Table 46 abconfig.cfg Default Value and Value Range
Field Default Value Valid Range