Technical data

Default Value and Value Range 119
Part Number UTSI-NJTC-200323150117 iAN-02EX
June 2005
Administrator Manual
dhcp_resrv_ip 192.168.100.100 Valid IP address
dhcp_resrv_mac 00-00-00-00-00-00 Valid MAC address
dos_rtp_check 1 0: disable RTP checking
1: enable RTP checking
dos_ping_reply 1 0: disable ping reply
1: enable ping reply
dos_http_serv_enable 1 0: disable web access
1: enable web access
dos_telnet_serv_enable 1 0: disable telnet access
1: enable telnet access
ems_server_address 0 Valid IP address
0: Disable
ems_server_port 63030 Valid port number
ems_community Private PrivatePublic
ems_expires 3600 Time in seconds maximum value=86400
Factoryreset *#322867973738 Default set to *#322867973738 used to set ATA to the
factory default settings.
lan_ip 172.25.25.1 Valid IP address
lan_mask 255.255.255.0 Valid Netmask
lan_gateway 172.25.25.1 Valid IP address
lan_dns1 192.168.100.1 Valid IP address
lan_dns2 192.168.100.1 Valid IP address
lan_proto Dhcp Enable / Disable DHPCS
0: static
1: dhcp
mac_spoofing_enable 0 0: disable mac cloning
1: enable mac cloning
mac_spoofing_mac_address 000000000000 Valid MAC address
network_mtu_rate 1460 Transport layer MTU
Range: 28 to1460,
ntp_server_address 0 Valid IP address
0: Disable
ntp_timezone -5 -13 to +12
ntp_expires 86400 Time in seconds
pstn_switchkey 0000 Valid 4 digits number
pstn_offhookdelaytime 0 Time in seconds
port_forward_1 tcp,0.0.0.0,0 Protocol, valid IP, valid Port
port_forward_2 tcp,0.0.0.0,0 Protocol, valid IP, valid Port
port_forward_3 tcp,0.0.0.0,0 Protocol, valid IP, valid Port
port_forward_4 tcp,0.0.0.0,0 Protocol, valid IP, valid Port
port_forward_5 tcp,0.0.0.0,0 Protocol, valid IP, valid Port
Table 46 abconfig.cfg Default Value and Value Range
Field Default Value Valid Range