Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
106
A
PPENDIX
B:
I
AN-02EX P
ROVISIONING
M
ETHODOLOGY
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
wan_ip=172.25.25.1
wan_mask=255.255.255.0
wan_gateway=172.25.25.1
wan_dns=192.168.100.1
wan_dns3=0.0.0.0
pppoe_username=1234
pppoe_password=0000
provision_priority=0
provision_server_address=devicecfg.private.net/devicec
fg/utstarcom/config
provision_server_port=69,100,200
provision_http_server_address=devicecfg.private.net/de
vicecfg/utstarcom/config
provision_http_server_port=80
provision_group=0
provision_expires=86400
provision_server_address_backup=0
provision_sync_check=0
upgrade_server_address=devicecfg.private.net/firmware/
utstarcom
upgrade_server_port=69
upgrade_http_server_address=devicecfg.private.net/firm
ware/utstarcom
upgrade_http_server_port=80
upgrade_filename=U53V004.00.00_UTSTARCOM-V1.8.2.19a.cp
r
upgrade_provisapp_filename=U53V004.00.00_UTSTARCOM-pro
visapp.V0.0.1.cpr
provisapp_enable=1
wan_provisioning=1
debug_level=0
default_t1=300
dscp=1
dmz=0
dmz_ip=0.0.0.0
dhcp_start=172.25.25.2
dhcp_end=172.25.25.21