Technical data

104 A PPENDIX B: I AN-02EX P ROVISIONING M ETHODOLOGY
iAN-02EX Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Group Configuration File
The Group file contains the group information for a set of ATA's. It is
represented as: U53V005.00.00_UTSTARCOM- ISELIN.CFG.
File format is as follows:
<Board id>_<company>-<group name>.cfg
<Board id>= U53V005.00.00
<Company>=UTSTARCOM
<Type>=Group
Example: U53V005.00.00_UTSTARCOM-ISELIN.CFG
This file should include the settings that are common to a specific group of
users.
Any parameter value in this file supersedes the value from the GENERAL.cfg, in
case of duplications.
The ATA compares the board ID and the company name fields on the cfg file to
that which is set in the hardware. If it matches then ONLY the ATA considers
this configuration file authentic and downloads it and takes the configuration
parameters.
If there is a change in the parameter values compared to what is stored in the
ATA, the ATA makes changes to the configuration and performs an auto reboot
to bring the new configuration into effect.
MAC address specific Configuration File
The MAC file contains the encrypted information using the MAC ID as the key.
The MAC file is represented as:
U53V005.00.00_UTSTARCOM-00028A59FF35.CFG.
File format is as follows:
<Board id>_<company>-<device MAC>.cfg
<Board id>= U53V005.00.00
<Company>=UTSTARCOM
<Type>=MAC ID example 00028A59FF35
This file should include settings that are specific to a particular ATA.
For example this MAC file is used to encrypt the username and password for
SIP proxy/registrar. This file will be used to set the telephone number for each
subscriber.