Technical data
Table Of Contents
- iAN-02EX Release 1.0 Administrator Manual Issue 1.7
- Contents
- List of Tables
- List of Figures
- About This Guide
- Overview
- Hardware Installation
- Technical Specification
- Configuring TCP/IP Protocol
- Configuration
- Troubleshooting
- iAN-02EX Provisioning Methodology
- Provisioning overview
- Provisioning Features
- Provisioning Process rules
- Auto-Configuration
- Brief description on HTTP/TFTP Provisioning servers
- HTTP Provisioning servers
- Selection Prority for HTTP or TFTP servers
- Frequency of Upgrade
- Provisioning Server configuration files
- File format of the configuration File
- Encryption Engine
- Firmware Upgrade
- Provisioning Default Values
- UTStarcom, Provisioning Default Flag Values
- Sample Provisioning Flow Behavior
- Provisioning Flow
- Default Setting & Value
- iAN-02EX SNMP MIB Reference
- Upgrade Procedure
100
A
PPENDIX
B:
I
AN-02EX P
ROVISIONING
M
ETHODOLOGY
iAN-02EX
Part Number UTSI-NJTC-200323150117
Administrator Manual
June 2005
Following are the default values used for provisioning/upgrade server.
■
Provisioning priority defines the provisioning/upgrade server priority example
HTTP protocol first, TFTP protocol second.
Default value=0 [HTTP first and TFTP second]
■
Provisioning TFTP Server Address is set to default UTStarcom provisioning
server.
This server is used for transacting all configuration files using TFTP protocol.
Default values=devicecfg.private.net/devicecfg/utstarcom/config
■
Provisioning TFTP server ports are set to port 69 (1st-Priority), port 100
(2nd-Priority) and port 200(3rd Priority). These are TFTP ports used on the
TFTP servers and their order of prority.
Default values=69,100,200
■
Provisioning HTTP Server Address is set to default UTStarcom, provisioning
server.
This server is used for transacting all configuration files using HTTP protocol.
Default values=HTTP Address:
devicecfg.private.net/devicecfg/utstarcom/config
■
Provisioning HTTP server port is set to 80.
This is the HTTP port to be used for the HTTP Provisioning server.
Default values=80
■
User enters Group name in the group field. This information is used in the
group configuration file.
Default values=0
■
Provisioning expiry timer is set currently to 86400 seconds (24 hours). This
implies that the ATA will restart its next provisioning cycle after this
provisioning timer expires.
■
Upgrade TFTP Server Address is set to default UTStarcom, provisioning
server.
This server is used for transacting the firmware file using TFTP protocol.
Default values= devicecfg.private.net/firmware/utstarcom
■
Upgrade TFTP server port is set to 69.
This is the TFTP port to be used for the TFTP Upgrade server.
Default values=69
■
Upgrade HTTP Server Address is set to the default UTStarcom provisioning
server.
This server is used for transacting the firmware file using HTTP protocol.
Default values=devicecfg.private.net/firmware/utstarcom
■
Upgrade HTTP server port is set to 80.
This is the HTTP port to be used for the HTTP Upgrade server.