User's Manual

UT300-R Ethernet ADSL MODEM USER MANUAL
- 16 -
− Choose enable for Default Route option
− Fill the IP address, IP subnet mask and gateway IP address items with the parameters provided by
DSL ISP. Here we will use “202.117.118.25”, “255.255.255.0” and “202.96.199.133” as examples.
− Don’t change other options, click “Submit” button, and the result window is shown as Figure 3.7
Figure 3.6
c) Click Commit & Reboot label in Page Admin to access save configuration tools page, shown as Figure
2.3. Click “Commit” button. Wait till this message “Changes Committed Successfully...” appears. Click
“Reboot” button or turn off and on power of the ADSL MODEM. The MODEM will work on the new
parameters.
3.4 PPPOA AND PPPOE CONFIGURATION
There are two methods for PPPOE configuration: 1483 bridge + third-party dialup software; Internal virtual Dialup
function in the MODEM.
1483 bridge + third-party dialup software
−
Setup RFC1483 Bridge.
− Install third party dialup software such as Enternet300, WinPoet or RasPPPoE. For more detail consult
with the DSL ISP.
− Use the installed software to dial up.