User's Manual

Chapter 5 Typical Configuration Examples 55
WA3001-S Access Point User Guide
Step 3: Through the “Advanced Config/RADIUS Client” link to set the IP
address for the remote Radius Server. If the authentication is enabled on
Radius server, the same authentication has to be set for AP. Click on the
<Apply> button to effect the configuration
Step 4: Enable NAT configuration through the “Advanced Config/NAT” link.
Step 5: Through the “Advanced Config/Authentication” link to go to the
“Authentication” configuration window. Enable the 802.1x authentication, set
the Authentication mode to “Remote”, set the max online user number to
“10”.