User's Manual

Chapter 5 Typical Configuration Examples 53
WA3001-S Access Point User Guide
- Click <Apply>, the system will remind you to save the configuration,
and then restart the AP in order to take effect the configuration
Step 4: Click “Basic Config/ADSL Config”, set PVC to 0/35, enable “Reboot
ADSL module while reconnection”, then click <apply>.
Step 5: In the “General” of the WNIC2010 Utility, set the SSID value to the
same value as the AP
Step 6: In the “Security/Pre-Shared Key” of the WNIC2010 utility, enter
“mykey” as the Key1 value