User's Manual

WA3001-S Access Point User Guide
5
Typical Configuration Examples
AP in Bridge Mode
Take WA6012 as example:
Configuration Information:
1 AP working mode: Bridge mode
2 The default IP address for AP’s LAN interface is 172.18.37.1; Subnet
mask is 255.255.255.0
3 Set ESSID to “AP123”, set Channel to 1
4 Enable WEP Encryption, use key1: mykey
5 VPI/VCI0/35
6 Wireless network card configuration:
SSID: AP123
Use key1: mykey
The network topology refers to Figure 2.
Detailed Instructions:
Step 1: Refer to section “Login AP” in Chapter 3.
Step 2: Click the “Guide” link to go to the “Set AP mode” configuration
window. The default mode is Bridge mode, then click <next>.
- The “Set LAN interface” configuration window appears, use the
default IP address, then click <next>.
5