User's Manual

Chapter 4 Web-based Configuration 43
WA3001-S Access Point User Guide
Figure 61 Web Management Filter Configuration
• Filter based on IP address
- Enable Subnet or Mainframe Filter: After activate the IP address
filter function, the only configured IP address can access the AP.
- IP Address/Subnet Mask: A mainframe has one only IP address
input, a subnet mask needs one IP address and a subnet mask.
• Port based Network Access (Forbidden)
- Prohibit WAN Port Management: User is unable to implement the
management through WAN port after it is activated.
- Prohibit Wireless Port Management: Wireless users are not able to
access the AP after it’s activated.
Click <Apply> to submit and save the change
SNMP Configuration
Click “Advanced Config/SNMP Config”, it contains SNMP agent, SNMP end
user filter and SNMP trap configuration.
• SNMP agent config/SNMP end user filter configuration interface is
shown in Figure 62
Figure 62 SNMP Agent/SNMP End User Filter Interface
SNMP agent Setting:
- Enable SNMP agent: Activate SNMP agent function
- Read-only Community Name: The default is “public”, 1-64
alphanumeric letters.