User's Manual

Chapter 4 Web-based Configuration 37
WA3001-S Access Point User Guide
• Create a static user
Enter the static user’s MAC address, click <Add>, see Figure 50. The format
of MAC address is xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx. Select one status
of enable/disable/delete, click <Apply> to take the configuration effect.
Figure 50 Create a Static User Configuration
ARP Configuration
Click “ARP”, the ARP configuration interface is shown in Figure 51.
Figure 51 ARP Configuration
The user can add a new static ARP entry by entering the IP and MAC
addresses. All ARP entries can be displayed for verification. Click <Add> to
add new entry. The <Refresh> button will refresh the display of all ARP
entries.
Route Configuration
Click “Advanced Config/Route”, the Route Configuration interface is shown
in Figure 52.